Chemiphase CP-9010 is an oxygen scavenger and feed system corrosion inhibitor. It is formulated to protect the boilers, feed system, hotwell and steam system from corrosion due to oxygen attack.
Typical Physical Properties
- Appearance Dark brown liquid
- pH 10 - 11.5
- S.G. 1.12 - 1.14
- R. Density 1.2
- Viscosity 120-160 cps
CP-9010 is a solution of vegetable tannins in water with a alkalinity builder to give a slightly alkaline pH.
CP-9010 should be dosed to the hotwell either continuously or proportionally to the make-up, to maintain the levels specified by the Chemiphase consultant, as indicated by the analytical
Typical Dosage Rate 120-160 ppm as Tannin.
Features and Benefits
- CP-9010 is and will confer additional system protection by the formation of a tannate film on metal surfaces in the feed and boiler systems.
- CP-9010 is less affected by low or variable feed water temperatures and therefore affords better protection under such circumstances than other scavengers.
- CP-9010 is particularly beneficial when a boiler is off line or on standby since the film forming ability protects against pitting of the boiler tubes.
Before handling, read the Material Safety Data Sheet and container label for safe use, physical
and health hazard information.
STORAGE AND SHELF LIFE
When stored between 10 and 40oC in the original unopened container, C P 9010 has a shelf life of 36 months from the date of manufacture.
CP 9010 is available in 20 Litre & 200 Litre & 1000 Litre IBC Containers.
The information and all further technical advice is based on our present knowledge and experience. However, they imply no liability or other legal responsibility on our part, including with regards to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied of guarantee of product properties is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out by qualified experts in the sole responsibility of the customer.