Transform Your Patio with a Long-Lasting Wet Look Finish

Professional-Grade Solvent-Based Patio Sealer.  Enhance and protect your patio with our high-performance solvent-based wet look sealer — designed to bring out the natural beauty of paving, stone, concrete, and blockwork. Ideal for driveways, paths, patios, and more.   Our solvent-based wet look patio sealer is a professional-grade sealant designed to protect and enhance outdoor surfaces like block paving, concrete, natural stone, and Indian sandstone. This powerful formula delivers a rich, wet look finish while creating a protective barrier against water, oil stains, moss, algae, and weather damage.

Key Benefits:

• Wet Look Finish – Revives tired, dull surfaces with a rich, long-lasting sheen
• Seals & Protects – Guards against water ingress, stains, algae & oil
• Hard-Wearing Formula – Solvent-based durability for tough outdoor conditions
• UV Resistant – Helps prevent fading and weathering
• Fast Drying – Touch dry in hours, traffic-ready in 24

Ideal For:

• Block paving
• Concrete slabs
• Indian stone
• Natural stone
• Driveways & patios

Easy to Apply:

Simply clean your surface, shake the tin, and roll or spray on! One or two coats are all it takes for deep, wet-look protection that lasts.  Order today and give your outdoor space the showroom finish it deserves — professional results, DIY friendly.

Frequently Asked Questions

Q: Will this patio sealer darken the surface?
Yes – the wet look effect will slightly deepen the colour, giving a clean, enhanced appearance.

Q: Is it suitable for driveways?
Absolutely. It provides excellent durability for high-traffic areas like driveways and paths.

Q: How often should I reapply?
For best results, reapply every 2–3 years, or sooner in high-wear areas.

Q: Can it be used on new paving?
Yes, but allow at least 4 weeks curing time before sealing newly laid paving.

Q: Is it safe for pets and plants?
Once dry, the surface is safe. Avoid contact during application and curing.

Application Instructions:

• Ensure surface is clean, dry, and free from oil, dust, algae & coatings
• Only apply in dry conditions (no rain for 24 hrs).
• Shake container well.
• Apply evenly using a solvent-resistant roller, brush, or sprayer.
• Allow to absorb for 15–30 mins.
• Apply second coat after 1–2 hrs if needed.
• Keep surface traffic-free for 24 hrs. Full cure in 48 hrs.
• Clean tools immediately with solvent cleaner.

PPE Required:

Wear gloves, eye protection, and a mask/respirator in poorly ventilated areas.  Avoid skin and eye contact. Do not inhale vapours.

Safety & Storage:

Flammable – Keep away from heat, sparks, open flames & hot surfaces. Store in cool, well-ventilated area away from direct sunlight. Keep container tightly closed when not in use. Dispose of contents/container in accordance with local regulations.