CHEMIPHASE | BIOLOGICAL WASTEWATER TREATMENT
CP 1070 – Dairy Effluent Biological Degradation Powder
CP 1070 is a specialist biological wastewater treatment powder developed for dairy processing effluent. Its selected microbial blend supports the degradation of milk fats, greases, proteins, lactose and other organic materials, helping maintain biological treatment performance in wastewater systems handling high organic loads.
Dairy Waste Degradation
Targets fats, proteins, lactose and organic residues.
Biological Treatment Support
Supports biomass activity and sludge settlement.
10kg & 20kg Pails
Industrial supply with technical dosing support.
Features & Applications
- Selected natural micro-organisms for degradation of dairy fats, proteins and lactose.
- Designed for wastewater from dairy processing operations.
- Supports treatment of residual fats following DAF or grease separation.
- May assist with poor settlement, bulking sludge and Nocardia-related foaming.
- Suitable for plant start-up, reseeding, shock recovery and overloaded systems.
- Designed to work alongside existing biological treatment populations.
Suitable Wastewater Treatment Systems
CP 1070 is intended for biological wastewater treatment installations handling dairy-origin organic loads, including:
- Activated sludge treatment plants
- Biotowers and biological trickling systems
- Sequencing batch reactors (SBRs)
- Aerated lagoons
- Oxidation ditches
Dairy effluent can contain high concentrations of fats, proteins and lactose, increasing biological oxygen demand (BOD). Seasonal production can also create variations in wastewater flow and loading. CP 1070 supports the biological degradation process, with results dependent on treatment plant conditions.
Directions for Use
CP 1070 is supplied as a stabilised microbial powder on a cereal-based carrier and requires rehydration before application.
- Assess the system: Establish a site-specific dosing programme based on wastewater flow, organic loading and plant operating conditions.
- Prepare the water: Use lukewarm water at approximately 30°C in a suitable clean container.
- Rehydrate: Mix 1 part CP 1070 with 10 parts water, stirring thoroughly.
- Allow activation: Leave the mixture to stand for approximately 1 hour.
- Apply: Introduce the rehydrated product immediately upstream of the aerated section, such as a drain, pump sump or return sludge line, as specified in the treatment programme.
Important: The 1:10 ratio is for preparation, not the dose required for the wastewater. Treatment quantity and frequency must be established through a site assessment.
Technical Information & Pack Sizes
| Product |
CP 1070 Dairy Effluent Biological Degradation Powder |
| SKU |
CP1070 |
| Product Form |
Stabilised Biological Powder |
| Biological Base |
Selected Natural Micro-organisms |
| Carrier |
Cereal-Based Carrier |
| Application |
Dairy Processing Effluent |
| Target Materials |
Milk Fats, Greases, Proteins, Lactose and Organic Matter |
| Rehydration Ratio |
1 Part Product : 10 Parts Water |
| Rehydration Temperature |
Approximately 30°C |
| Rehydration Time |
Approximately 1 Hour |
| Treatment Dose |
Site-Specific Technical Assessment Required |
| Pack Sizes |
10kg and 20kg Pails |
Product Safety & Documentation
CP 1070 contains naturally occurring, non-genetically modified micro-organisms. Avoid inhaling powder and follow the handling, storage and personal protective equipment instructions in the current product Safety Data Sheet.
Prepare the product in clean equipment and avoid contact with concentrated disinfectants or substances that may adversely affect microbial activity.
For product-specific safety information, technical documentation and dosing assistance, contact Chemiphase.
Request SDS & Technical Information
Frequently Asked Questions
What does CP 1070 treat?
CP 1070 supports biological degradation of milk fats, greases, proteins, lactose and other organic material in dairy wastewater.
Which treatment systems can use CP 1070?
Published applications include activated sludge plants, biotowers, sequencing batch reactors, aerated lagoons and oxidation ditches.
How is CP 1070 prepared?
Mix 1 part powder with 10 parts lukewarm water at approximately 30°C and leave for 1 hour before application.
How much CP 1070 should be used?
Dosage depends on wastewater flow, organic loading and plant conditions. Contact Chemiphase for a site-specific dosing programme.
Need Dairy Wastewater Treatment Advice?
Contact Chemiphase to discuss dairy effluent characteristics, biological treatment performance and a suitable CP 1070 treatment programme.
Contact Chemiphase