High-quality deionised water for industrial cleaning, manufacturing and technical applications. Chemiphase DEION is produced using a multi-stage purification process to reduce dissolved mineral ions and provide a reliable water supply for applications where ordinary tap water is unsuitable.
DEION is suitable for processes requiring water with reduced dissolved mineral content, including:
Chemiphase uses a multi-stage treatment process to produce DEION deionised water:
This process produces deionised water suitable for a wide range of industrial and technical requirements.
DEION is supplied ready to use and requires no dilution. Dispense into clean, suitable containers and use according to your equipment manufacturer's instructions or process requirements. Keep containers closed when not in use to minimise contamination.
| Product | DEION Deionised Water |
| Product Type | Deionised / demineralised water |
| Treatment Process | Reverse osmosis, twin-bed deionisation, UV treatment and 0.2-micron filtration |
| Application | Industrial, cleaning, manufacturing and technical processes |
| Pack Sizes | 1 × 5L, 2 × 5L, 4 × 5L, 160 × 5L, 210L drum and 1,000L IBC |
| SKU | DEION-5 |
| Supplier | Chemiphase International Ltd |
Chemiphase supplies deionised water in 5-litre containers, pallet quantities, 210-litre drums and 1,000-litre IBCs. Contact our team for regular industrial supply, bulk pricing and technical requirements.
Store in clean, securely closed containers away from sources of contamination. DEION is intended for industrial and technical applications and should not be used as drinking water or for medical, pharmaceutical or sterile processes without the appropriate product specification and quality approval.
For product specifications, water quality information or technical documentation, contact the Chemiphase team.
Request Technical InformationContact Chemiphase for drum and IBC supply, trade pricing and technical advice.
Contact ChemiphaseA useful product for those using Methanol/water for with direct and/or chargepipe injection (don't use tap water as the minerals will clog your nozzles), however, you MUST filter/strain this deionised water when mixing before use, I filter it using 120 mesh and I find "bits" on the filter, if not removed these WILL clog your inline filter eventually or worse still your nozzles!